AJA FS2 Скачать руководство пользователя страница 60

Страница: 60 / 120

FS2 Frame Synchronizer/Converter v3.0 60 www.aja.com

3 Video Output Mode

The parameter sets the final video output of the Video Processor to normal

video or the test pattern generator. Alarms occur if conflicting video formats are

selected.

Normal (default)

Test Pattern

Normal video output from the processors.

The output of the test pattern generator.

Background Fill

This parameter selects the background source used to fill any part of the

processor output raster not filled with video from the main input video. For the

Video Processor 1 menu, the second selection is Video 2. For the Video Processor

2 menu, the second selection is Video 1. Using this feature, you can key Video 2

into Video 1 or vice versa

4 Background Fill

Black (default)

Video 1/2

Matte

Selects black as the background fill video.

Selects Vid1 or Vid2 as the background fill video.

Selects matte as the background fill video.

Loss of Input

This parameter selects the automatic action that occurs if the video input is lost.

The Black selection (default) cuts the video to black. The Freeze selection freezes

video on the last available good frame.

5 Loss of Input

Black (default)

Freeze

Switches to black if input video is lost.

Freezes on the last available good video frame if input is lost.

Upconvert and Downconvert

These parameter select the type of Upconversion the Video Processor performs

on the selected SD source input. They are in effect only when the input is SD

(525i or 625i) and the selected output format is HD (720p, 1080i, or 1080p), or

when the input is HD (720p, 1080i, or 1080p) and the output is 2K (2048 x 1080).

When upconverting to 2K, the selections do not precisely describe the resulting

picture. For example, 4x3 pillar is not precisely 4x3, and 14x9 is not precisely 14x9.

However, picture scaling is such that the visual effect closely resembles an SD-to-

HD upconvert.

6 Upconvert Mode

4x3 Pillar

14x9 Pillar

(default)

Full Screen

LB to Full

Wide Zoom

Results in 4x3 image at center screen with black sidebars.

Results in 14x9 image, zoomed slightly to fill a 14x9 image with black

sidebars.

Anamorphic full screen display.

Image is zoomed to fit the full screen (letterbox).

Using a combination of zoom and stretch, the image is sized to fit a

16x9 screen (this can introduce a small aspect ratio change).

Содержание FS2

























































































































Результаты поиска

Содержание FS2

Отзывы:

AJA FS2, Инструкция по установке и эксплуатации, Страница: 60 / 120

Результаты поиска

Содержание FS2

Отзывы: