AJA FS2 Скачать руководство пользователя страница 49

Страница: 49 / 120

FS2 Frame Synchronizer/Converter v3.0 49 www.aja.com

1.1-1.40 Presets #1-#40

These parameters let you recall, edit the name of, and store an FS2 preset

configuration for the selected storage register. Forty storage registers are

available.

Preset #1–#40

[Preset Name]

Recall

Edit Name

Store

Shows the currently selected preset register number. Turn SELECT

choose the desired register. Then turn ADJUST to choose Recall,

Edit Name, or Store for the selected register.

Shows the name of the selected preset register, which can be

edited.

Recalls that preset. Push ADJUST momentarily to perform (take) the

recall. The display reports “Loading” and “Complete” during the

recall.

Enables editing the name of the preset register. Push ADJUST to

enable editing (blinking character), use the SELECT and ADJUST

knobs to edit the name and then press ADJUST to save the edited

preset register name.

Stores the current set of all System, Video 1/2, Audio 1/2, and Output

parameters to the selected preset register.

Interaction of Presets and GPIs

Triggering presets using GPI inputs offers considerable power but also requires

some care to avoid unexpected results. If you plan to trigger presets using GPIs,

please see the information about the

"Interaction of Presets and GPIs" on page 44

SYSTEM Menu Group

The SYSTEM Menu Group includes parameters for setting up various FS2 system

related features (video formats, audio level standards, etc.

1 Component In Format

This parameter configures the format of the Component video input for SMPTE,

Beta, or Composite. Selecting Composite (Y) programs the Component (Y/G)

input to accept a composite signal. In this case, all parameters set to a value

of Component are subject to and influenced by the composite signal on the

Component Y/G input. For example, in the VIDEO menu, setting Video1 Input to

the value of Component, switches the composite signal on the Component Y/G

input into the Video 1 Processor.

SMPTE YPbPr (default)

Beta YPbPr

Composite (Y)

Configure the Component Video Input source as SMPTE YPbPr. This

is the default for HD component video.

Configure the Component Video Input source as Beta YPbPr

(standard definition).

Configure the Component Video Input source as composite,

providing a second composite input (requires version 1.1

firmware).

2 Component Out Format

This parameter configures the format of the Component video output for SMPTE,

Beta, RGB, or Composite. Selecting Composite (Y) programs the Component

(Y/G) output to deliver a composite signal. In this case, all parameters set to a

value of Component are subject to and influenced by the composite signal on

the Y/G Component output. For example, in the OUTPUT menu, Component Out,

Содержание FS2

























































































































Результаты поиска

Содержание FS2

Отзывы:

AJA FS2, Инструкция по установке и эксплуатации, Страница: 49 / 120

Результаты поиска

Содержание FS2

Отзывы: