manualshive.com logo in svg

AJA FS2, Инструкция по установке и эксплуатации

Поделиться
Скачать
AJA FS2 Скачать руководство пользователя страница 64

FS2 v2.1r1

www.aja.com

64

 

Output Format Mapping

The Output Format selection is remembered for each of the frame rates. If you change 
the frame rate selection, the Output Format associated with the newly selected frame 
rate is recalled.

2K1080p Audio

The FS2 does not support embedded audio output for the following formats:

• 2K1080p 29.97 or 2K1080p 30 

• 2K1080p 59.94 or 2K1080p 60 when 3G Config is set to 3 Gb Level B or 1.5 Gb DualLink. 

3 Video Output Mode

The parameter sets the final video output of the Video Processor to normal video or the 
test pattern generator. Alarms occur if conflicting video formats are selected. 

Background Fill

This parameter selects the background source used to fill any part of the processor 
output raster not filled with video from the main input video. For the Video Processor 1 
menu, the second selection is 

Video 2

. For the Video Processor 2 menu, the second 

selection is Video 1. Using this feature, you can key 

Video 2 

into 

Video 1

 or vice versa

4 Background Fill

.

Loss of Input 

This parameter selects the automatic action that occurs if the video input is lost. The 

Black 

selection (default) cuts the video to black. The 

Freeze

 selection freezes video on the 

last available good frame.

5 Loss of Input

Upconvert and 
Downconvert

These parameter select the type of Upconversion the Video Processor performs on the 
selected SD source input. They are in effect only when the input is SD (525i or 625i) and 
the selected output format is HD (720p, 1080i, or 1080p), or when the input is HD (720p, 
1080i, or 1080p) and the output is 2K (2048 x 1080). When upconverting to 2K, the 
selections do not precisely describe the resulting picture. For example, 4x3 pillar is not 
precisely 4x3, and 14x9 is not precisely 14x9. However, picture scaling is such that the 
visual effect closely resembles an SD-to-HD upconvert.

6 Upconvert Mode

Normal (default)
Test Pattern

Normal video output from the processors.
The output of the test pattern generator.

Black

 (

default

)

Video 1/2
Matte

Selects black as the background fill video.
Selects Vid1 or Vid2 as the background fill video.
Selects matte as the background fill video.

Black (default)

Freeze

Switches to black if input video is lost.
Freezes on the last available good video frame if input is lost.

4x3 Pillar
14x9 Pillar 

(default)

Full Screen
LB to Full
Wide Zoom

Results in 4x3 image at center screen with black sidebars.
Results in 14x9 image, zoomed slightly to fill a 14x9 image with 

black sidebars.

Anamorphic full screen display.
Image is zoomed to fit the full screen (letterbox).
Using a combination of zoom and stretch, the image is sized to fit a 

16x9 screen (this can introduce a small aspect ratio change).

USO 

RESTRITO

Содержание FS2






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды