FS2 v2.1r1
www.aja.com
53
During recall, the display reads,
Recalling
until the recall is finished. On recall completion,
the displays shows the success or failure:
Recalled
,
Failed
, or
Empty
. A failed or empty
recall does not recall anything and leaves the FS2 as it was. (Preset registers are empty
until you store something in them.)
During a store, the display reads
Storing
until the store is finished. On store completion,
the display shows
Complete
or
Failed
. A failed store does not store anything and leaves
the preset register as it was. To retry a failed store, turn
SELECT
to another preset number
and then back to the desired preset number.
1 Factory Preset
This parameter recalls a read-only Factory Preset.
1.1-1.40 Presets #1-
#40
These parameters let you recall, edit the name of, and store an FS2 preset configuration
for the selected storage register. Forty storage registers are available.
Interaction of
Presets and GPIs
Triggering presets using GPI inputs offers considerable power but also requires some
care to avoid unexpected results. If you plan to trigger presets using GPIs, please see the
information about the
“Interaction of Presets and GPIs” on page 48
SYSTEM Menu Group
The
SYSTEM
Menu Group includes parameters for setting up various FS2 system related
features (video formats, audio level standards, etc.
1 Component In
Format
This parameter configures the format of the
Component
video input for SMPTE, Beta, or
Composite. Selecting
Composite (Y)
programs the
Component (Y/G)
input to accept a
composite signal. In this case, all parameters set to a value of
Component
are subject to
Factory
Recall
Recalls factory values. Push
ADJUST
momentarily to perform (take)
the recall. The display reports “Loading” and “Complete” during
the recall. User preferences, network settings, and existing
Presets are not affected by recalling the Factory Preset.
Preset #1–#40
[Preset Name]
Recall
Edit Name
Store
Shows the currently selected preset register number. Turn
SELECT
choose the desired register. Then turn
ADJUST
to choose Recall,
Edit Name, or Store for the selected register.
Shows the name of the selected preset register, which can be
edited.
Recalls that preset. Push
ADJUST
momentarily to perform (take)
the recall. The display reports “Loading” and “Complete” during
the recall.
Enables editing the name of the preset register. Push
ADJUST
to
enable editing (blinking character), use the
SELECT
and
ADJUST
knobs to edit the name and then press
ADJUST
to save the
edited preset register name.
Stores the current set of all System, Video 1/2, Audio 1/2, and
Output parameters to the selected preset register.
USO
RESTRITO
