AJA FS2 Скачать руководство пользователя

Страница: 43 / 125

FS2 v2.1r1

www.aja.com

Multiple Field
Parameters: IP
Address

These steps explain how to surf and change multiple field parameter menus, such as the

IP Address

settings, where there are multiple fields to set within the value.

1. Press the

CONFIG

Menu Group button. The

Config

menus appear.

2. Turn the

SELECT

knob clockwise to access the

2.1 IP Config

Turn the

ADJUST

knob to change the setting to

Static Addr

. This setting allows you to manually set the

IP address in the following steps.

3. Turn the

SELECT

knob clockwise one click to access menu

2.2 IP Address

. The current

IP address appears on the second line. For example: 10.2.42.8

4. Push the

ADJUST

knob momentarily to highlight the first field, which is the octet

(group of numbers) to the left of the first period. The numbers blink to indicate they
are ready for editing.

5. Turn the

ADJUST

knob to change the blinking field value.

6. Turn the

SELECT

knob to highlight the next field, a group of numbers to the right of

the first period. The field will blink when they are ready for editing.

7. Turn the

ADJUST

knob to change the blinking field value. For coarse adjustment of

wide-ranging values, hold down

CONFIG

and turn

ADJUST

8. Repeat this process of selecting fields and changing them until all fields have been

changed as desired.

9. Push the

ADJUST

knob quickly to confirm all settings. Alternatively, you can scroll

counterclockwise back through the fields, stopping on any of them to change them.
They must be blinking before they can be changed.

Other Actions

• To begin editing the first field in the parameter, push

ADJUST

momentarily.

• To confirm (save) edits, push the

ADJUST

knob momentarily again. This saves the edits

and exits the edit mode.

• To undo edits to all of the fields before the changes are confirmed, push the

SELECT

knob. This returns all fields to their previous settings.

• To reset the entire parameter to the factory default value, push in and hold down the

ADJUST

knob for at least 4 seconds.

Turn

SELECT

to scroll to parameter

50.2 IP Address

When editing params, turn SELECT
to advance fields.

SELECT ADJUST

2.2 IP Address
192.168.0.2

Parameter Menu

Current Setting

Push

ADJUST

edit the first field.

Turn

ADJUST

to change values.

Push again to save.

Select the

CONFIG

Menu Group button

CONFIG

USO

RESTRITO

Содержание FS2






























































































































Результаты поиска

Содержание FS2

Отзывы:

Похожие инструкции для FS2

Бренды по названию

Популярные бренды

AJA FS2, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FS2

Отзывы:

Похожие инструкции для FS2

Бренды по названию

Популярные бренды