
4K2HD Mini-Converter v1.15r1 8
www.aja.com
Installation
Typically, 4K2HD installation consists of the following steps:
1. Ensure the 4K2HD is disconnected from power.
2. Connect video equipment to the converter BNCs and HDMI connector.
3. Apply power to the converter (AJA power supply included).
4. The 4K2HD will now run using the default factory settings. If you wish to
alter the factory settings, you’ll need to:
• Install the AJA Mini-Config software on your computer.
• Attach the 4K2HD via USB.
• Make your changes using Mini-Config setup screens.
See
"USB Control and Setup—Using AJA Mini-Config" on page 9
for more
information.