12G-AMA v1.0 12 www.aja.com
Switches 6 and 7 Channel Mapping For Disembedded
Groups
The following table shows how combinations of setting these two switches
affects disembedding channel mapping.
Table 4. Disembedded Input Channel Mapping
DIP SW 6
DISEMBD GRP L
DIP SW 7
DISEMBD GRP H
SDI Embedded
Input Group
SDI Embedded
Input Channel
Audio Output
Channel
Left (0)
Left (0)
1
1 —>
1
2 —>
2
3 —>
3
4 —>
4
Right (1)
Left (0)
2
5 —>
1
6 —>
2
7 —>
3
8 —>
4
Left (0)
Right (1)
3
9 —>
1
10 —>
2
11 —>
3
12 —>
4
Right (1)
Right (1)
4
13 —>
1
14 —>
2
15 —>
3
16 —>
4
USB Control and Setup—Using AJA Mini-Config
Your AJA Mini-Converter can be used right out of the box for some applications
since it is designed to recognize inputs and perform standard actions
automatically by default. However, to use its full capability, you must use AJA’s
Mini-Config software application for PCs and Macs. This same application can be
used to update to new Mini-Converter software released by AJA.
NOTE: DIP switch 1 must be ON (Remote, Right) to permit Mini-Config control of the
unit. If DIP switch 1 is set to OFF (Local, Left), Mini-Config will report status, but its
control functions will be locked out.
Acquiring Mini-Config
AJA’s Mini-Config application is available for download from the AJA website.
To download the latest Mini-Config package, which includes the Mini-Config
application, Mini-Converter firmware, and documentation, go to:
https://www.aja.com/products/mini-config-software
Select either the Windows or Mac icon to download the desired version.
