AJ Aircraft Acuity, Руководство по сборке

Страница: 10 / 24

aj-aircraft.com Page 9
Landing Gear
Landing gear parts bag contents are shown below.
The landing gear screws are supplied installed in the
fuselage. Remove these screws.
Carefully locate the landing gear slot in the side of the
fuselage just below the leading edge of the wing pocket.
Use a covering iron to attach the covering around the
slot. Make a single cut in the center of the slot the width
of the landing gear.
Slip the landing gear through the slot. Notice that there
are right and left hand parts. The landing gear should be
swept back.
Use 4 flat washers from the parts bag with the screws
removed earlier to attach the landing gear. Add a drop
of removable thread locker to the screws during
assembly.
(A magnet makes installing the screw much easier.)