AJ Aircraft 93 AJ Laser 230z, Руководство по сборке

Страница: 7 / 25

aj-aircraft.com Page 2
Landing Gear
Landing gear parts contents are shown below.
Install the landing gear with the thicker portion of the
airfoil to the front. Use a socket head screw and washer
through the outside and a nylon lock nut on the inside
of the fuselage.
Fit the filler block to the bottom of the landing gear.
You may need to sand a cove down the center of the
block to fit without rocking.
The filler block can be held in position with strips of
covering material, packing tape, or it can be glued in
place.
Slide the cuffs over the landing gear and secure with
screws. Be carefull to not break the screws. If the
screw seems to be difficult to insert use a drill to open
up the hole. (Some people have found they prefer a
dob of silicone inside the cuff hold them secure.)
Install the axels in the landing gear. Rotate the axel so
the collar set screw flats are accessable when the wheel
pant is installed. Secure with nylon lock nuts.