G300Ni
11
8
CONFIGURATION
There are several methods to configure the R500Ni unit, ranging from the standard configuration
using a keyboard and mouse directly connected to the unit, or by using VNC or SSH which are
done via a network.
8.1
Getting Started
8.1.1
Standard Setup
Connect the keyboard, mouse and monitor and power on the unit. When prompted enter the
username and password for Rasbian, which are the standard settings:
User:
pi.
Password:
raspberry
This will then boot directly into the desktop frontend of the Rasbian as shown below:
Note: It is recommended to change the default login details.
