4.2. Operation mode manual selection
To impose manually the air conditioning mode (Fig. 12)
,
do as
follows:
1)
Short press on the icon of the air-conditioning mode already selected
.
2)
All air-conditioning icons will be shown and the icon of the air-conditioning mode previously
selected will be flashing.
3)
Make a short press on the air-conditioning mode you would like to impose on the rest of
systems. To activate the different heat modes, follow these instructions:
In cooling mode you can select the following modes:
Air cooling
:
short press when the icon
is flashing.
Radiant cooling
:
short press twice when the icon
is flashing.
Combined cooling
:
long press when the icon
is flashing.
Dry
:
Make a long press on
. It will be showed
.
In heating mode you can select the following modes:
Heat pump
:
short press when the icon
is flashing.
Radiant heating
:
Short press twice when the icon
is flashing.
Combined heating
:
Make a long press when the icon
is flashing.
Fig. 12
Important:
In case of to be connected to an AZXCCPC configured as Aerothermial / 2 Pipes in
forced / semi-forced mode and have more than one control group, the mode change is executed
for all control groups (Fig. 13). For that press on the activated control group in the screen
, it
will show all available control groups. Following press on all groups
and select the work
mode for all groups.
Fig. 13
32
