Airzone AZRA6BLUEFACECB, Быстрое руководство по установке

Страница: 28 / 88

28
ES
EN
FR
IT
PT
DE
ADVANCED SETTINGS
To access the advanced configuration menu of the thermostat and Blueface Think follow the following steps:
Blueface
Think
Important: Use to confirm and to return.
From this menu you can change the system and zone parameters.
SYSTEM PARAMETERS
• System address.
Use this parameter to define the system number in your installation using this parameter. The
Supermaster
option (available in installations with Airzone production control board, AZX6CCP / AZX6CCPWSCC) allows
you to impose the operation mode of the system to the rest of the systems connected to the CCP in a semi-forced way:
• Temperature range.
Use this parameter to select the highest temperature in heating mode (19-30 ºC, by default 30ºC)
and the lowest temperature in cooling mode (18-26 ºC, by default 18ºC). It is also possible to disable some of the
modes.
•
Hysteresis Configuration. Defines the temperature differential between the room temperature and the set-point
temperature required to start applying the Algorithm RadianT. This algorithm prevents overheating in underfloor air
conditioning installations. If your installation has radiators, set this value to 0ºC. (By default 2ºC)
• Radio channel. It activates/deactivates the wireless association module of the system.
Press and hold
Press and hold Press and hold
Press once
Operation mode:
System 1
Available operation modes:
Rest of the systems