background image

ASSEMBLY OF

FANMATE

®

 VENT COVER

1.

 

Place 

FANMATE

®

  Vent  Cover  Body  on  a  flat 

surface.

2.

  Lay Louver section behind opening of vent cover 

body with tabs up as shown in Figure 1.

3.

  Slide oval shaped tabs on Louver section through 

the slots on the Vent Cover Body.

4.

  Rotate Louver section upward and snap into top of 

the Vent Cover Body.  Make sure the Louver edge 

goes behind the tabs inside of the Vent Cover 

Body as shown in Detail A in Figure 2.

5.

  Be sure all three (3) snaps are secured and both 

oval shaped tabs remain in the slots as shown in 

Details B and C in Figure 2.

6.

  This concludes the Assembly of the 

FANMATE

®

 

Vent Cover.  Please proceed to the 

INSTALLATION 

INSTRUCTIONS.

Figure 1

Figure 2

DETAIL 

A

DETAIL 

B

DETAIL 

C

INSTALLATION INSTRUCTIONS

FOR

 

MAXXFAN

®

 and 

MAXXFAN

® 

Plus 

FANS WITH BUILT-IN Mounting tabs

1.

 Place 

FANMATE

®

 over the four (4) mounting 

tabs on the 

MAXXFAN

®

 with the louvers facing 

the rear of the vehicle.  See Figure 3.

2

.

  Slide the 

EZ

Clip

TM

 pins into place as shown in 

Figure 4.  Rotate the 

EZ

Clip

TM

 pins upward to lock 

into position on top of the mounting tabs.

INSTALLATION INSTRUCTIONS

FOR 

MAXXFAN

®

 STANDARD FANS

WITHOUT BUILT-IN Mounting tabs

1.

  Remove the plastic plugs from the side walls of the 

MAXXFAN

®

 and fasten the mounting brackets into 

the pre-drilled holes using the #6 x 1/2” screws provided.

2

.

  Slide the 

EZ

Clip

TM

 pins into place as shown in 

Figure 4.  Rotate the 

EZ

Clip

TM

 pins upward to lock 

into position on top of the mounting tabs.

PLEASE REFER TO THE REVERSE SIDE OF THIS INSTRUCTION 

SHEET FOR ADDITIONAL INSTALLATION OPTIONS.

Figure 4

FEATURING 

EZ

Clip

TM

 by

 MAXXAIR

®

 

VENTILATION SOLUTIONS

SUPERIOR RAIN PROTECTION • OPTIONAL BUG SCREEN

ASSEMBLY AND INSTALLATION INSTRUCTIONS

FOR MODELS: SMOKE 755, WHITE 855, AND BLACK 955

FANMATE

®

READ AND SAVE THESE INSTRUCTIONS

WARNING:  

Improper installation, adjustment, alteration, service or maintenance will void warranty and can cause property damage, personal injury or 

loss of life.  Installation of this unit must be made in accordance with the written instructions provided in this manual.  No agent, representative or employee 

of AIRXCEL, INC. or other person has the authority to change, modify or waive any provision of the instructions contained in this manual.

CONTENTS

QTY DESCRIPTION

QTY DESCRIPTION

1

Vent Cover Body

4

#8-32 x 1/2” SS 

Phillips Head Screws

1

Louver Section

4

#8 SS Nuts

4

Aluminum Brackets

4

#8 SS Fender Washers

4

EZ

Clip

TM

 Pins

4

#8 SS Lock Washers

8

#6 x 1/2” SS Self-tapping Screws 

(for installation over high-powered fans)

TOOLS REQUIRED

DESCRIPTION

POWER DRILL with 3/16” & 3/32” drill bits
Adjustable Wrench (or 11/32” end wrench)
Phillips Head Screwdriver (#2)
Pencil

Figure 3

OPTIONAL BUG SCREENS AVAILABLE FOR LOUVER SECTION

FOR SMOKE 755 

FANMATE

®

, ORDER SCREEN P/N: 00-955203

FOR WHITE 855/BLACK 955 

FANMATE

®

, ORDER SCREEN P/N: 00-955202

SEE RV DEALER, PARTS SUPPLIER OR RETAILER FOR DETAILS

Отзывы: