43
Screen O0
Screen O0
Press the
key twice to move the cursor to the
GENERAL OFF
parameter.
Use the
/
arrows to change this parameter to
ON
.
Press
to validate and then on the key
.
.
From the main menu, use the
/
arrows to highlight the "
ON/OFF-
SUMMER/WINTER
" menu. Validate this selection by pressing the
key. The
display moves to the
O0
screen.
In order to start, the
Aqu@ Scop HT Split
must always be
ON
at the level of the appliance's display. In addition,
the ambience terminal must be in demand mode (when it is connected). To force the terminal to enter demand
mode, change it to Comfort mode
with an ambience temperature set at 30° C.
The appliance
OFF
function will always have priority and therefore you will never be able to start the
Aqu@ Scop HT Split
in this mode.
If the ambience terminal is in demand mode, and if no alarm is active and the water temperature condition permits
(inlet water
at least 7° C below set temperature
), the
Aqu@ Scop HT Split
will start operating.
Normal
Aqu@ Scop HT Split
operation is guaranteed with an appliance inlet (system return) water temperature
above 20° C.
21.2.7. AqU@ SCOP HT SPLIT ON/OFF SETTINGS
Содержание Aqu@Scop HT SPLIT 12-6
