AIRTUG
®
Dumpster Tugs
Assembly & Operating Instructions
MODEL: HD Dumpster Tug Electric (TT-HD-EA-8) 5,000 Lbs
Airtug, LLC is not responsible for damage sustained when
proper clearance is not maintained by the operator
between the tug and its surroundings.
Caution:
Braking too abruptly from a higher speed can
seriously damage the differential ring gear. This is
considered abuse and will not be covered by the transaxle
warranty.
Note:
All reference to “right” and “left” orientation is made
while standing behind the tug, looking forward.
Recommendations:
Ensure the rear wheels of the dumpster are
fixed in place and DO NOT caster or rotate. The front wheels can
and should rotate or caster for ease of movement when not using
the Airtug®. At least 15% of length of dumpster needs to be
beyond rear caster (ie - 100 inch long dumpster - need at least 15
inches from center of fixed caster to rear edge of dumpster). For
dumpsters with a gross weight over 3,000 pounds, the rear fixed
caster should be placed such that 20% of the dumpster is beyond
the fixed caster (ie. - 100 inch long dumpster - need at least 20”
from center of fixed caster to rear edge of dumpster).
Dumpster Attachment Installation:
Components that come with the HD Dumpster Attachment:
Hardware
a.
3/8-16 x 1.5” bolts - 4 pcs
b.
3/8-16 Nylon Lock Nuts - 4 pcs
c.
3/8 washers - 8 pcs
d.
1/2 x 3” clevis pin and hairpin - 1 pc each
SAVE THIS DOCUMENT AND ENSURE ALL OPERATORS READ IT PRIOR TO MOVING ANY DUMPSTERS
1
100%
15%
