Airstream REI Co-op Special Edition, Руководство пользователя

Страница: 33 / 90

Interior
2023 REI Special Edition
5-5
Storage
The Basecamp REI Special Edition features aircraft-
style L-track storage, overhead storage netting, bungee
cords, and cabinet netting� Use extra care to secure
items when storing them in these locations� Loose
items can cause damage to the interior of the trailer
should they become dislodged� The wall-mounted and
floor-mounted storage track is durable, lightweight,
and high-grade aluminum. A wide range of fittings and
accessories can be purchased, making it versatile�
NOTE
Wall-mounted tracks have a max 100-pound
capacity.
Galley cabinets should have the heaviest items stored
on the bottom and lighter items placed higher� When
loading, put skillets and canned goods on the floor or
bottom shelf, while cereals and crackers can be stored
higher� Use unbreakable plates and saucers, and
consider storing your dish towels around them�
WARNING
Keep flammable material away from the furnace
and do not block furnace vents.
4� Align and insert the T-bolts into the rectangular
openings in each floor base. Twist the legs
clockwise and tighten until snug�
5� Align the tabletop sockets with the legs and push
down on the tops until seated on the legs�
The tables will swivel/spin, allowing you to position
them to your needs� When traveling or using the rear
door to load cargo, remove the dinette tables and legs
and properly store them�
Removal
Pull straight up on the tabletops to remove them,
unscrew the legs, and store� Place the covers on the
floor bases when the legs are not in place.
Lounge
Bed Conversion
1� Follow the previous instructions for dinette table
installation but use the shorter legs in place of the
longer set�
2� Start forming the bed base by removing the
support boards from the overhead netting and
placing them under the seat cushions in the
cutouts at the back of the trailer�
3� Lift each seat cushion and fold the four hinged
support boards out across the tables�
4� Unsnap the seatbacks from the wall and separate
them at the velcro�
5� Using the seatbacks, fill the gap between the seat
cushions to form the mattress� Place the smaller
seatbacks toward the back and the remainder
toward the front�
Partial Bed/Extended Seating Conversions
You can arrange baseboards and cushions in several
positions� For example, you can set up two tables
with a bench across the back for additional seating�
Alternatively, you can set up a partial bed with one
table at the front� Follow the steps above to assemble
the bases and tables to your liking�