Airstream Basecamp 2020, Руководство пользователя

Страница: 32 / 88

Interior
5-4
2020 Basecamp
Lounge
The dinette seats and tables have been designed to
convert into a bed� The dinette tables will need to be
lowered into position by installing a set of smaller legs
which are located on the underside of the curbside
dinette seat hatch� The longer legs can now be stored
in this same location� Once the tables are lowered into
position each dinette seats top can be unfolded to lay
across the table tops� There are two support boards
located in the zipped storage nets that need to be
placed tat the head of the bed� The dinette seat back
cushions will be laid between the two seat cushions to
fill in the middle of the bed.
Storage Tips
Galley cabinets should have the heaviest items stored
on the bottom and lighter items placed higher� After
loading, put skillets and canned goods on the floor or
bottom shelf, while cereals and crackers can be stored
higher� Use unbreakable-type plates and saucers, and
consider storing your dish towels around them�
Overhead custom netting has been installed in several
locations around the Basecamp� Use common sense
when storing items in these locations� Large heavy
items can be dangerous if stored in these locations
while traveling and can cause damage to the interior of
the trailer should they become dislodged�
WARNING
Keep flammable material away from the furnace
and do not block furnace vents.
Dinette Tables
The dinette tables can be removed and stored to make
room to use the rear access door� The table top is
removed by pulling straight up on the table top� The
Legs can be removed by depressing the black buttons
on each of the floor sockets and rotating the table
legs� The table tops can be stored on the face of the
curbside dinette seat via bungee cords, while the legs
can be attached to the underside of the dinette seat
hatch�