En-2
Operating
manual
1
Instruction book for
operation
CD-ROM
1
Include the operating
manual for this control-
ler
Installation plate
1
For Touch Panel Con-
troller installation (it is
attached to the back
of the Touch Panel
Controller)
Screw (M4 x 20 mm)
8
Screw for touch panel
controller installation
Washer
8
Washer for touch panel
controller installation
Touch pen
1
Pen for touch panel
controller operation
Binder
4
Prevents dropping off
of the cable
ELECTRICAL REQUIREMENT
31
When connecting the Touch Panel Controller, use the
following wiring.
Use
Size
Wire type
Power supply
cable
Max.1.25 mm
2
(16AWG)
Type 60245 IEC 57
or equivalent
Min.0.5 mm
2
(20AWG)
Transmission
cable
0.33mm
2
(22AWG)
22AWG LEVEL 4
(NEMA) non-polar 2
core, twisted pair solid
core diameter 0.65mm
(1/32 in.)
External input
cable
0.33mm
2
(22AWG)
2 core, twisted pair
(Max.cable length :
25m (82ft.))
Use
Remark
Power supply
cable
1Φ 50/60Hz 100-240V
2 wire + earth (ground)
(Always earth (ground) the unit)
Transmission
cable
L
ON
W
ORKS
compatible cable
External input
cable
Use cable in accordance with local
rules for cable
L
ON
W
ORKS
*
is registered trademark of Echelon Corporation
in the United States and other countries.
Fuse capacity
5 A
SELECTING AN INSTALLATION LOCATION
41
Dimensions
41 11
Touch panel controller
▪
main unit and installation plate
54(2-1/8)
246 (9-11/16)
26
0 (10-1/4)
26 (1-1/32)
93 (3-21/32)
Top view
Front view
Side view
Side view
Front cover
Touch
panel
Rear cover
Touch pen
USB port
Unit:mm (in.)
198 (7-25/32)
66 (2-19/32)
16
7 (6-9/16)
17
9 (7-1/16)
2-Ø17 (21/32)
Rear view
Installation
plate
For the screw position dimensions of the installation plate, see
*
page 4.
Installation restrictions
41 21
Surrounding space
▪
Provide the following space when installing touch panel
controllers in a row and also provide the following space
from the projecting parts of the surroundings.
100 (3-15/16) or more
Space necessary at surroundings
200
(7-7/8)
or more
200
(7-7/8)
or more
100 (3-15/16) or more
200
(7-7/8)
or more
Unit:mm (in.)
Minimize the horizontal and vertical tilts of the switch box
*
installed at the installation site in advance.
