manualshive.com logo in svg

Airspan ProST, Руководство пользователя

Поделиться
Скачать
Airspan ProST Скачать руководство пользователя страница 46

                                

ProST Hardware Installation User Guide

 

 

 

 
Page 46 

Commercial in Confidence 

UWB-D00111 Rev L 

 

 

6.1.2  Connecting the SDA-4S Type II, SDA-4S/VL Type II or SDA-4S/DC Type II 

The SDA-4S Type II, SDA-4S/VL Type II or SDA-4S/DC Type II adapters (referred hereafter as 
SDA-4S) provide one 15-pin D-type female port for interfacing with the ProST (which also 
provides a 15-pin D-type female port).  

The ODU-to-IDU connectivity implements a CAT 5E cable with 8-pin RJ-45 connectors at either 
end. However, for allowing the use of RJ-45 connectors, your ProST kit includes two DB15-to-
RJ45 adapters that can easily be attached to the 15-pin D-type ports of the ProST and SDA-4S. 

The cable setup for ProST to SDA-4S connectivity is as follows: 

¾

 

Cable:

 Straight-through CAT 5E Ethernet cable 

¾

 

Connectors:  

 

 

ProST:

 DB15-to-RJ45 adapter 

 

 

SDA-4S:

 DB15-to-RJ45 adapter 

 

  CAT 5Ee cable with 8-pin RJ-45 male connectors on either end 

¾

 Connector 

pinouts: 

 

Figure

 

34

 ‐ 

Pinouts

 

ProST

 

to

 

SDA

‐

4S

 

 

Note:

 The standard ProST/ProST-WiFi kit does not include the SDA-4S Type 

II, SDA-4S/VL Type II or SDA-4S/DC adapters. For pricing and ordering of 
the SDA-4S Type II, SDA-4S/VL Type II or SDA-4S/DC adapter, please 
contact your nearest Airspan dealer. 

 

To connect the ProST to the SDA-4S: 

1.  Attach the DB15 side of the DB15-to-RJ45 adapter to the ProST's 15-pin D-type port 

(female), labeled 

DATA & PWR

. 

2.  Attach the DB15 side of the second DB15-to-RJ45 adapter to the SDA-4S's 15-pin D-type 

port (female). 

3.  Plug the RJ-45 connector, at one end of the CAT 5Ee cable (not supplied), into the RJ-45 

port of the DB15-to-RJ45 adapter located at the ProST. 

4.  Plug the RJ-45 connector, at the other end of the CAT 5Ee cable, into the RJ-45 port of the 

DB15-to-RJ45 adapter located at the SDA-4S. 

Содержание ProST








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды