Airspan FlexNET ASN-700, Руководство пользователя

Страница: 25 / 76

605-0001-801 FlexNET Link Products
Figure 11 Configuring the bridge interface
Removing an interface from the bridge (ASN-800 only)
The Bridge member interfaces section of the configuration page is used to remove
interfaces from the bridge. Available interfaces are listed in the Interface combo box.
To remove an interface from the bridge (ASN-800 only)
1. Using the combo box, select the network interface to be removed.
2. Click the Delete checkbox beside the selected interface.
3. Click the OK button to remove the selected interface from the bridge.
Binding an interface to the bridge (ASN-800 only)
The Add Interface to Bridge section of the configuration page is used to bind interfaces to
the bridge. Available interfaces are listed in the Bridge Interface combo box.
To bind an interface to the bridge (ASN-800 only)
1. Using the combo box, select the network interface to be bound to the bridge.
2. Click the Add link beside the selected interface.
3. Click the OK button to bind the selected interface to the bridge.
Changing radio interface settings
Click NETWORKING>radio1 or NETWORKING>radio2 links in the configuration menu to
open the configuration pages for the first and second radio interfaces, respectively.
Interface settings specific to the radio interfaces are described here (see Figure 12). Depending
on the product version you are configuring some of the Radio Settings might be missing or
appear differently.
Note: The ASN-700 comes with one Ethernet and one radio interface only, ethernet1
and radio1.
19