Airspan AirVelocity 1500 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 36

Airspan AirVelocity 1500 Скачать руководство пользователя страница 32

AirVelocity 1500 Installation Guide

DUG01560

Airspan Commercial and Internal Use

27

6 GPS Antenna Mounting

6.1 Verify the Parts and Kits

Table 14: GPS Kit Contents

Item

Image

Active GPS Antenna

10m GPS Cable - RG58 SMA-F to SMA-M

GPS Antenna Mounting Bracket

Double Sided Sticker

Note:

The GPS antenna is an active antenna. The 10m extension cable must be used

for proper operation. Directly connecting the antenna to the eNodeB is not allowed.

The antenna enclosure is a waterproof IP67 and can be mounted both outdoors and indoors.

Figure 20: GPS Antenna

The antenna installation supports three different installation options:

Option 1

– Installation on the inside of a window

1. Remove the paper from one side of the double sided sticker and attach the sticker on the

front side of the antenna.

2. Thoroughly clean the area of the window where you intend to attach the GPS antenna.
3. Remove the paper from the other side of the sticker and fix the antenna on the window from

the inside. Verify there are no obstacles between the window and the outside (so the antenna
can access

“clear sky”).

Position the antenna either on a sealed (un-openable) window or close to the

hinge

side.

4. Connect the 10m RF cable to the antenna. Make sure to firmly tighten the SMA connector.
5. Route the cable to the base station and connect it to the GPS port on the base station. Make

sure to firmly tighten the SMA connector.

«
...
30
31
32
33
34
...
»

Содержание AirVelocity 1500





































Отзывы:

Нет отзывов