Airspan AirVelocity 1500 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 36

Airspan AirVelocity 1500 Скачать руководство пользователя страница 31

AirVelocity 1500 Installation Guide

DUG01560

Airspan Commercial and Internal Use

26

5 Connect and Manage Cables

5.1 DC Cable Connection

Insert the DC power pug into the DC IN on the panel of the unit.

Figure 18: DC Power Plug

Figure 19: DC In - Panel

5.2 Mounting the AC to POE++/DC Power Supply

The AC to POE++/DC power supply should be mounted on a wall in close proximity to the AirVelocity
1500 unit. Mount the power supply with screws through the two (2) holes on the unit

’s frame. The power

supply should be mounted close to an available electrical outlet.

5.3 Ethernet Cable Installation

Before connecting to the appropriate port you can manage and store any excess cable by winding it
and tying it off. This takes up any excess slack and presents a more thorough and orderly installation.

5.3.1 Copper Ethernet Cable

Typical RJ45 connection (when applicable).

5.3.2 Fiber Ethernet (SFP) Cable

SFP module and connector (when applicable),

not

supplied by Airspan.

«
...
29
30
31
32
33
...
»

Содержание AirVelocity 1500





































Отзывы:

Нет отзывов