
AirVelocity 1500 Installation Guide
DUG01560
Airspan Commercial and Internal Use
22
Figure 12: Mounting AirVelocity 1500 on Conventional Ceiling
8.
Once the rail bracket projections are in the slots swing the unit into the other side of the
Ceiling mounting plate insert and secure insert and secure the Locking pin (supplied)
through the hole on Rail bracket and the Ceiling mounting plate.
Figure 13: Insert & Secure Locking Pin
9.
Remove the plastic cover to expose the connectors.
10.
Connect the necessary cables to the relevant ports.
Connect to power
Copper Ethernet port
– ETH – if applicable
Fiber Ethernet port
– SFP – if applicable
GPS cable - to the GTPS port
– when required
Debug port
– if needed
11.
Once all connections are completed, replace cover.