AirStrand 2200 Installation Guide
AirStrand 2200 – Installation Guide
© Copyright Airspan Networks Ltd., 2021
P/N:
DUG01287
Rev. A2, Oct 2021
18
4
Installing AirStrand 2200
AirStrand 2200 is installed on the strand (the steel cable) that runs from pole to pole supporting
other cables, such as telephone and cable company cables that run from pole to pole.
When mounting the AirStrand 2200 on a cable strand, you must use the Strand mount accessory kit.
The kit contains several parts that you should assemble before mounting on a cable strand. The
Strand Accessory kit contains the hanger bracket(s) and the hanger clamp(s) with the required
hardware (included) required for installation.
To install AirStrand 2200 to a cable strand, you need to perform these operations:
Attach the hanger brackets to the AirStrand 2200 unit.
Lift and hang the AirStrand 2200 unit onto the strand cable.
Fasten the hanger clamps to the hanger bracket(s) securing them to the strand cable.
Connect interface (5/8” Interface connector type) to the cable infrastructure.
The GPS antenna comes already assembled on the AirStrand 2200 unit.
4.1
Strand Mounting the AirStrand 2200
!
The AirStrand 2200 is intended to be strand mounted in the telecommunications space
between poles, not in the electrical space.
