Airspan 605-0000-742 Скачать руководство пользователя страница 31

Страница: 31 / 83

Physical Description

AC/DC POWER CONVERTER

This section provides a description of the external

AC/DC Power converter

- Optional.

The third-party external AC/DC Power Converter is an optional unit that connects to the BSDU in the

event there is no -48VDC availability at the Base Station site. The AC/DC Power Converter chassis

fitted with one PS Unit for BSDU (PC-BSDU-1) supports up to 8 BSRs. An additional PS unit is

available (optional) for redundancy.

The figure below illustrates the AC/DC Power Converter's physical dimensions.

AC/DC Power Converter

Physical Dimensions

The AC/DC power converter physical dimensions are described in the following table.

Parameter Value

Comment

Height

43.2 mm (1.7 inches)

Width

482.6 mm (19

inches)

Depth

228.6 mm (9 inches)

The physical dimensions exclude the bracket flanges for

mounting.

Redundant PS Unit

The RPSU-BSDU-1 is a redundant PS Unit for the BSDU AC/DC power converter. The power factor

corrected (PFC) front ends provide a 48 VDC output for distributed power applications. The small 1U

by 2U size allows for configurations of either height in hot-swap redundant systems while its

internal fan and cooling design permits wide use with reliable operation.

The figure below illustrates the redundant PS Unit.

Содержание 605-0000-742




















































































Результаты поиска

Содержание 605-0000-742

Отзывы:

Бренды по названию

Популярные бренды

Airspan 605-0000-742, Установка оборудования

Результаты поиска

Содержание 605-0000-742

Отзывы:

Бренды по названию

Популярные бренды