Airsight XX34A, Руководство пользователя, Страница: 8 / 29

8
3. MJPEG add timestamp on record : Select this to enable the function.
4. MJPEG compressed into MPEG-4 format : Select this to enable the function, this will
use less space for recorded files.
5. Automatically recovered once recording space is full : If selected, once the hard
disk is full, it will recover automatically.
2.3.1.2 Capture :
1. Add/Delete : Click this to set/delete the path for snapshot files to be saved.
2. Open the folder when capture image : if selected, this will pop-up the folder when
capture image is saved.
2.3.1.3 Alarm :
1. Alarm Record : Select this to activate record function once alarmed.
2. Alarm recording time : Set the duration for every alarm, this can be
30/60/120/180/300 seconds.
3. MJPEG add timestamp on record : Select this to enable the function.
4. Alarm pop-up E-map : Select this to enable the function, this will pop-up the E-map
which was set once alarmed.
2.3.1.4 Auto run
1. Program runs automatically connect all the devices : If selected, when running the
program, this will connect all the devices which were set successfully automatically.
2. Auto run when computer powering on : If selected, when your computer starts up
the software will run automatically. You can save the username and password here in
advance.