manualshive.com logo in svg

AirSep AS-Q, Инструкция по эксплуатации, Страница: 179 / 198

Поделиться
Скачать
AirSep AS-Q Скачать руководство пользователя страница 179

AS-Q—AS-Z Series Instruction Manual 

179

AirSep Corporation

5

www.magnalube.com

SAFETY DATA SHEET

SECTION 6: ACCIDENTAL RELEASE MEASURES 

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES :

For non-emergency personnel: 

No action shall be taken involving any personal risk or without suitable 

training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering.  
Do not touch or walk through spilled material. Put on appropriate personal protective equipment.

For emergency responders: 

If specialised clothing is required to deal with the spillage, take note of any 

information in Section 8 on suitable and unsuitable materials. See also the information in “For non- 
emergency personnel.”

Environmental precautions:

 Avoid dispersal of spilled material and runoff and contact with soil, waterways, 

drains, and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, 
waterways, soil or air).

  

METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP :

Small spill: 

Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled 

waste container. Dispose of via a licensed waste disposal contractor.

Large spill: 

Move containers from spill area. Prevent entry into sewers, water courses, basements or confined 

areas. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a 
licensed waste disposal contractor. 

Note: See Section 1 for emergency contact information and Section 13 for waste disposal.

SECTION 7: HANDLING AND STORAGE 

PRECAUTIONS FOR SAFE HANDLING :

Protective measures: 

Put on appropriate personal protective equipment (see Section 8).

Advice on general occupational hygiene: 

Eating, drinking and smoking should be prohibited in areas where 

this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and 
smoking. Remove contaminated clothing and protective equipment before entering eating areas. 

Note: See also Section 8 for additional information on hygiene measures.

Содержание AS-Q







































































































































































































Отзывы:

Нет отзывов