AirSep AS-1000, Инструкция по эксплуатации, Страница: 53 / 91

AirSep
®
Corporation 12/02
AS-20—1000 Instruction Manual A-1
A Appendix Technical Data
Specifications
Data in this section refer to standard AS-20 through AS-1000 model oxygen
generators. The oxygen generators may use feed air at specifications outside
those shown; however, use of such feed air may require modification of the oxygen
generators at the AirSep Corporation factory to ensure the product oxygen meets
the design specifications. Consult your sales representative to determine whether
your oxygen generator requires modifications for your application.
AS-20
Oxygen output: 20 SCF/hr at 0–45 psig*
0.53 Nm
3
/hr at 0–310 kPa**
Oxygen purity: 90% minimum
Oxygen dew point: -73°C (-100°F)
Dimensions: 13 x 11 x 57 in. (W x D x H)
33 x 28 x 145 cm (W x D x H)
Approximate weight: 134 lb
61 kg
Feed Air Requirements
Flow: 5.3 SCF/min* (0.14 Nm
3
/min**)
Pressure: 90 psig (620 kPa) minimum
Temperature: 50°C (122°F) maximum
Power requirements: 120 VAC, 50 Hz, Single Phase, 60 W, 0.5 Amp
120 VAC, 60 Hz, Single Phase, 60 W, 0.5 Amp
240 VAC, 50 Hz, Single Phase, 60 W, 0.25 Amp
240 VAC, 60 Hz, Single Phase, 60 W, 0.25 Amp
*SCF (standard cubic foot) gas measured at 1 atmosphere and 70°F.
**Nm (normal cubic meters) gas measured at 1 atmosphere and 0°C.
3