MUA Filter Pressure Sensor
FPS Installation Guide
This document is applicable to BBCB-A-1-1 Make-Up Air Controllers.
This document will take you through the upgrade to include the filter delta P
sensor. A pressure sensor is used to determine the “dirtiness” (or pressure drop)
of the Make-Up Air Unit Filters. This is helpful in determining when the filters need
to be replaced. Because every installation is different and the Make-Up Air usage
is different for every house hold, it is advisable to slowly determine at what filter
pressure the filters need to be replaced.
Every V-Bank Filter Box comes with two pressure measuring ports installed and in
most cases covered by a piece of aluminum tape.
Remove the tape from the back of the V-Bank Filter Box Assembly.
Disconnect the Make-Up Air power cord.
If the MUA Control box was mounted, remove the box mounting screws to be able
to access the rear of the MUA Control Box.
1
A-A
View A-A
Screw
Nut
Nut
Screw 2x
Nut 4x
Note:
