Page
3
of
9
Airquee Ltd, Duel House, Llandowlais Street, Cwmbran, NP44 7XB, UK
3. SETUP
MAKE SURE THE MECHANISM IS NOT
CONNECTED
TO A POWER SOURCE BEFORE ASSEMBLING IT!
The mechanism consists of:
Drive Motor
Bull
Wheels
Control Panel
Wrenches
x1
x1
x4
x1
Metal Shaft
Legs
Leg Covers
Motor Drive
Cover
x1
x4
x4
x1
*The listed inclusions are in addition to the ones shown in the Constant Flow Land Inflatables -
Operation Manual. The number and type of inclusions depends on the model you ordered.
1. Add the Wheels and the Metal Shaft to the
Drive Motor.
2. Unfold the bed at the desired location and move the Drive Motor to the center of the bed with
the help of the supplied Wheels and Metal Shaft.
The site must be level or have a slope of
not more than 5° in any direction.
3. Exchange the legs with the wheels and dress the legs with the PVC covers.
4. Add the Drive Motor Cover.
