![Airplane Factory Sling-2 Скачать руководство пользователя страница 74](http://html1.mh-extra.com/html/airplane-factory/sling-2/sling-2_pilot-operating-handbook_2878758074.webp)
Airplane Factory SLING 2
Pilot Operating Handbook
Page | 4-10
DC-POH-002-X-B-6
Revision : 2.6
4.5
Engine start
Reference should be made to the oper
ator’s manual for the Rotax
914 UL, 912 iS or 912 ULS engine, as the case may be, for operational
guidelines and instructions. These should be incorporated into the
normal or emergency procedures as applicable.
4.5.1
Before starting engine
1. Pre-flight inspection
- completed.
2. Emergency equipment
- on board.
3. Passenger
- briefed.
4. Seats, seatbelt and harnesses
- adjust and secure.
5. Brakes
- on.
4.5.2
Engine start
If a Rotax 912 iS or 914 UL engine is installed (rather than a Rotax 912 ULS
engine) please refer to the supplement at the end of this manual.
1. Master switch
- on.
2. EFIS back-up battery
- on, verify EFIS on and back-up
battery voltage.
3. Propeller switch (if applicable)
- on.
CAUTION
In case of long-term parking it is recommended to turn the engine
over several times (Ignition / magnetos OFF!) by turning the
propeller in order to prime the lubrication system. Always handle
the propeller blade area with the palm of your hand i.e. do not
grasp only the blade edge with your fingers.
CAUTION
Observe temperature limits for engine start as specified in
paragraph 2.14.