Airo A16 J Series, Руководство пользователя

Страница: 62 / 128

User’s Manual – A16 J A18 J Series Page 62
7.2. General maintenance
Below are listed the main maintenance jobs to be done and the relevant schedule (the machine features an hour
counter).
Operation Frequency
Screw tightening (see paragraph "Various adjustments") after the first 10 operation hours
Checking the oil level in the hydraulic tank after the first 10 operation hours
Check of the battery state (charge and liquid level) Every day
Check of deformation of tubes and cables Every week
Checking stickers and code plates Every month
Greasing joints and sliding pads Every month
Checking the oil level in the hydraulic tank Every month
Checking the fixation of the engine on the elastic supports Every month
Checking the efficiency of the emergency devices Every year
Checking all electric junctions Every year
Checking all hydraulic couplers Every year
Periodic functional check and structure visual check Every year
Screw tightening (see paragraph "Various adjustments") Every year
Check of drive reduction gear oil change Every year
Efficiency check, and adjustment of the pressure relief valve (machine travel) Every year
Efficiency check-up of the pressure relief valves (machine operations) Every year
Checking the efficiency of the brake system Every year
Air purging from the floating axle cylinders Every year
Functional check of inclinometer Every year
Functional check-up of the platform overload controller Every year
Functional check-up of the M1 micro switches Every year
Operation check of the dead-man pedal Every year
Adjusting the sliding pads of the telescopic boom Every year
Replacement of the hydraulic filters Every two years
Drive reduction gear oil change Every two years
Total oil change in hydraulic tank Every two years
DIESEL (D) AND ELECTRIC-DIESEL MODELS (E/D): As it is possible to install different types of diesel
engines, refer to the manual of the engine manufacturer for all maintenance operations.
BIO-OIL KIT
PANOLIN BIOMOT 10W40
AFTER 10 YEARS IN USE SEND THE MACHINE BACK TO THE MANUFACTURER FOR COMPLETE
OVERHAULING.