Airo A16 J Series, Руководство пользователя

Страница: 53 / 128

User’s Manual – A16 J A18 J Series Page 53
5.4.4. Starting of the12V emergency pump (OPTIONAL for D-models).
All Diesel models can be equipped with a 12V pump to
perform arm/boom/jib operation (lift, descent, slewing) in
case of any emergency situation.
The emergency electric pumps must be operated from
the control panel on the basket as following :

Select the control panel on the basket by means
of the key-switch located on the electric control
unit on ground;

Unlock the push-button turning by a ¼ of turn
clockwise.

Set the power switch (M) to "Electric".

Press and hold the green button (O) down
throughout the required manoeuvre;

Press and hold the deadman pedal down
throughout the required manoeuvre;

Operate the machine controls as described in
the previous chapters.
Fig. 12
CAUTION! Strictly start the 12V emergency pump in the sequence described above!
The emergency electric pumps can be started from the control panel on-ground as following :

Select and hold the on-ground control panel by means of the key-switch (A) located on the electric control unit
on ground;

Set the power selector (C) to "Electric".

Now you can start the 12V emergency electric pumps and operate the machine controls as described in the
previous chapters.
CAUTION! The 12V emergency electric pump is only for supplying enough power for recovering the
platform in case of a fault in the main power system. Do not use it during normal operations.