page 13 of 22
Version 1.4 – June 2015
- ADS_Clinic Operator Manual _V1_4_Mai 2015_Software 1_20_ENG.doc
The top of the cover (deck, cover) is the smooth side; the bottom of the cover contains
Jersey-upholstery. The tracing consists of Polyurethane stretch at the top and a Jersey-
layer at the bottom.
After the selection of the type of mattress, the ADS
clinic
starts filling the connected
mattress. In doing so, the microprocessor of the ADS getting a pressure control to de-
termine, when the correct pressure for the selected patient's weight is reached. Further,
the operating mode icon in the upper-left corner, flashes (three filled rooms, if you have
selected operating mode "static", and two filled rooms and one non-filled room, if you
have selected operating mode "alternating pressure"). If the symbol shown in the upper
left corner of the display no longer flashes, the filling process is completed. From now on,
the patient may be placed on the mattress.
Please note:
Never place a patient on the mattress before the filling process is completed
and the ADS
clinic
indicates that the system is operational. The patient may
not guaranteed bed sores by pressure relief at the filling process and missing
volume fill early. The ADS clinic features a log system, that duration, the er-
ror code, the set weight, cycle time and counter-pressure of the patient re-
cords.
The key ‘security’ is during start-up not activated. During the start-up process, no
attention should be given to this.
The mattress consists of nylon and polyurethane coated nylon fabric.
