A. System Components in the Box:
1.
Fountain Pump with Quick Disconnect, float mount ring and
Classic Spray Nozzle Cone (installed)
2.
Float - Blue
3.
Power Cord
4.
Control Panel
5.
Crown & Trumpet Spray Plate Nozzle (interchangeable)
6.
Trumpet Spray Plate Nozzle (interchangeable)
B. Prepping the EcoSeries™ for Installation:
1)
Ensure you have power close to your pond. If you don’t, we recommend to ALWAYS use a licensed
electrician to properly run power down to the pond.
2)
Mount the Control Panel in a fixed position next to the power source.
3)
Choose Your Spray Pattern (Fig. 3)
a)
The EcoSeries™ comes packaged with the Classic spray cone nozzle installed. However, the
EcoSeries™ includes two additional spray nozzles (Trumpet and Crown & Trumpet).
Pick the one that best suits you or your special event.
b)
To change a nozzle, simply unscrew the Nozzle Nut, remove the nozzle, replace with a new nozzle
and screw the Nozzle Nut back into place.
4)
Assembling the Unit (Fig. 4)
a)
Lay the float flat on the ground with Airmax
®
logo facing up.
b)
Place the fountain pump assembly into the center of the float.
c)
Lift the float straight up and ensure that the fountain pump lead power cord passes through the
center hole. Gently lay the fountain to one side.
d)
Securely attach the power cord to the fountain pump lead quick disconnect.
e)
Attach the power cord strain relief to the loop underneath the float mount ring. (Fig. 2)
f)
Attach a mooring cable (not included) for each of the two loops underneath the float
mount ring (Fig. 2).
g)
Pick up the fountain by the float and place into the water.
Note: a minimum of 24” of water is
required for proper operation.
h)
Tie one side of the mooring rope to a stake and place the stake securely into the ground.
i)
Take the other stake and mooring rope and walk around the pond, carefully pulling the
fountain across the water. Once the fountain is in position, tie the 2nd mooring rope to
the 2nd stake and place securely into the ground.
j)
Ensure both mooring ropes are snug to prevent the fountain from twisting and shifting
during operation.
3. Setup & Installation
• 2 stakes
• 2 carabiners
• 4 cable clamps
• 100 feet vinyl coated
galvanized wire
(Mooring Line)
Recommended Mooring Items
Power Cord
Loop
Loop
Cord Strain Relief Attachment
Carabiner
Vinyl Coated
Galvanized Wire
EcoSeries™ Floating Fountain
Control
Panel
Mooring Stake
Mooring Line
Classic
Trumpet
Crown & Trumpet
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Unscrew Nozzle Nut to
change Nozzles
