AirMan PDS400S-6E1, Инструкция по эксплуатации

Страница: 65 / 89

5.Periodic inspection/Maintenance
5-13
5.5.11 Clean of element in sedimenter
Every 500 hours
<Procedure>
1. Turn fuel selector valve [A] to [OFF] position.
2. Loosen the drain valve [B] and drain out condensed
water inside.
3. Turn the cup [C] to the left and remove it.
Be careful to remove the cup [C], because it is filled
with fuel. Wipe out split fuel completely.
4. Remove float [D] inside cup [C].
5. Washing element [E] and the cup [C] inside with new
fuel.
6. Replace element [E] and O-ring [F], [G] if they are
found broken or damaged.
(For part number, See 5.4)
7. After finishing clean, assemble it in reverse procedure.
 If air remains in the fuel line, set the CONTROL
POWER switch to
position and release the air
by loosening bolt [H].

Drain the condensate in container
[I], and then
dispose of condensate according to the designated
regulations.
5.5.12 Clean inside of radiator
Every 500 hours

When the inside of a radiator and water conduits of an engine are dirty with scale and rust, its
cooling efficiency will be deteriorated. Clean the interiors of such components periodically.

When cleaning it, contact directly us or distributor because it requires expert technical
knowledge.
A160708-1
A H
G
F
E
C
D
B
I
ON
OFF
Loosen
Go
to
Discount-Equipment.com
to
order
your
parts