AirMan PDS400S-6E1, Инструкция по эксплуатации

Страница: 28 / 89

3.Operation
3-10
3.3.8 Check sedimenter for condensate
When red float [B] under element [A] in fuel filter is raised up to upper level, drain water.
<Procedure>
1. Turn fuel selector valve [C] to “OFF”position.
2. Loosen the drain valve [D] and drain out condensed
water inside.
3. Make sure to tighten the drain valve [D] securely,
after draining the condensate.

Drain the condensate in container [E] and then
dispose of condensate according to the designated
regulations.

When checking, do not use alcoholic parts cleaner for cleaning. If it sticks to plastic
parts, which might causes cracks and less visual recognition for fuel level. In worst
case, which might causes cracks and fuel leaks.
3.3.9 Check wiring of each part
Check each wiring for any loose connection, damage to insulating sheathed portion, disconnection,
and short-circuit.
3.3.10 Check piping of each part
Check each piping for any loose connection and also check each hose and pipe for any tear and
leaks.
3.3.11 Check in the machine
Periodically check the inside of the machine for dust and flammables.

Be sure to wear protector such as helmet, protective glasses, earplug, safety shoes,
gloves and dust protective mask for safety operation conforming with details of work.

Temperature of muffler and exhaust valve will become high. Be sure to remove
combustibles such woodchip, dead leaf, waste paper nearby it.

Just in case for fire, be sure to set fire extinguisher nearby machine.

It is helpful to keep emergency contact numbers for urgent visit clinic, ambulance and
firehouse.
A130567-2
E
A
B
D
OFF
ON
C
Loosen
Go
to
Discount-Equipment.com
to
order
your
parts