Q: How to connect Traveler 3G to 3G network?
A:
Please refer the following to configure Traveler 3G:
1.
The Traveler 3G can be managed remotely by a PC through either the wired or
wireless network.
It is recommended to configure the router through the Ethernet port for the first
time setup.
The default IP address of the Traveler 3G is 192.168.1.1 with a
subnet mask
of
255.255.255.0.
This means the IP address of the PC should be in the range of 192.168.1.2 to
192.168.1.254.
2. Please power on Traveler 3G and connect PC to Traveler 3G by cable. (Please
switch the Ethernet port to LAN)
3. Please open your browser and type in the Traveler 3G’s IP address(default IP is
192.168.1.1
) into the web browser’s address field.
