AirLive SNMP-FSH2602MG, Руководство пользователя

Страница: 56 / 137

AirLive SNMP-FSH2602MG User’s Manual
44
a number 1 through 10.
Forward Delay
time
You can change forward delay time, The number of seconds a port
waits before changing from its Spanning-Tree Protocol learning and
listening states to the forwarding state. Enter a number 4 through 30.
Table 4-2 Spanning Tree Setting Parameters
The following parameter can be configured on each port, click set Apply button
to modify
Figure 4-20 Spanning Tree Port Parameter
Parameter Description
Port Priority
You can make it more or less likely to become the root port,
the rage is 0-255,default setting is 128
the lowest number has the highest priority.
Path Cost
Specifies the path cost of the port that switch uses to
determine which port are the forwarding ports
the lowest number is forwarding ports, the rage is 1-65535
and default value base on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10
Port Mirror
(Administrator menu)
The Port Mirror is a method for monitor traffic in switched networks. Traffic through ports
can be monitored by one specific port. That is, traffic goes in or out monitored ports will be
duplicated into Analysis port.