AirLive AC-1200R, Руководство по установке

Страница: 1 / 5

SETUP FOR ALIVE ROUTER AC-1200R
1. INSTALLATION STEPS
Installation steps required for the AC-1200R before it can work properly in your network.
1. Install antennas into the AC-1200R
2. Connect ONR LAN port into the WAN port of the AC-1200R
3. Connect PC/Laptop into LAN port of AC-1200R or ONR LAN port if without AC-1200R.
4. Connect Power jack for to the power port for both AC-1200R and ONR
5. ON power for ONR and wait it finished boot (Power/PON/Internet light up) and follow by AC-
1200R.
6. To access AC-1200R .Then open the browser on your PC and type in “192.168.0.250” to reach the
web management
7. Please proceed to AC-1200R configuration.
2. AC-1200R Configuration
Important Before you start. Please note password and SSID are case sensitive.

The default IP address is: 192.168.0.250 Subnet Mask: 255.255.255.0

When using Web UI, the login as follow:

User name: admin

Password: airlive

The default radio mode for Radio 1 is 802.11ac/n

The default radio mode for Radio 2 is 802.11g/b/n

The default SSID for Radio 1 is: AirLive

The default SSID for Radio 2 is: AirLive 5G

The default wireless mode is : Dual Band Router Mode

After power on, please wait for 2 minutes for AC-1200R to finish boot up
 Please remember to click on “Apply” for new settings to take effect
3. Prepare your PC
The AC-1200R can be managed remotely by a PC/Laptop through either wired or wireless
network. The default IP address of the AC-1200R is
192.168.0.250 with a subnet mask of
255.255.255.0 This means the IP address of the PC should be in the range of 192.168.0.1 to
192.168.0.253.