Ver. 1A
Quick Installation Guide
Package Content:
•
32-bit PCI Gigabit Ethernet
Card
•
Driver Disk
•
Quick Installation Guide
1
Model # AGIGA32PCI
Section 1
Installing Hardware
Step 1
Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2
Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Step 3
Cover the computer’s chassis.
Step 4
Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5
Re-plug the power cord and turn on the computer.
Section 2
Installing Driver
Note
: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Step 1
At the
Found New Hardware Wizard
, select
Install from a list or
specific location (Advanced)
and click
Next
.
Windows 2000
: Click
Next
at the
Found New Hardware Wizard
. Select
Search for a suitable driver for my device (recommended)
and click
Next
.
Windows ME
: Click
Next
at the
Add New Hardware Wizard
. Select
Specify
the location of the driver (Advanced)
and click
Next
.
Windows 98SE
: Click
Next
at the
Add New Hardware Wizard
. Select
Search
for the best driver for your device (Recommended)
and click
Next
.
