Airlink101 Raven C3210, Как пользоваться инструкцией, Страница: 6 / 21

Serial cable
or
Bluetooth
Execute FastSurvey, and after initializing the connection with Z-max :
- Select the “Equip” tab.
- Select “Receiver utilities” button
- Select “Send command to receiver”
- Send the following command to the receiver followed by OK
Command to send to Z-max (*) Response from Z-max
Comments
$PASHS,SPD,B,9 $PASHR,ACK Set PortB in 115.2Kbps
$PASHS,PRT,B,232 $PASHR,ACK Set port B in RS232 mode
$PASHS,NME,GGA,B,ON $PASHR,ACK Send GGA message to port B in order
to intiate the connection to iCGRS
$PASHS,SAV,Y $PASHR,ACK Save this configuration into Z-max
(*) You can also use a computer, with the appropriate cable connected to Z-max, and send
these command with Hyperterminal software utility from Windows suite.
3.2.3 Third step – Using Z-max with Airlink modem
What you need:
- A Z-max rover
- A Airlink Raven modem (GPRS or CDMA)
- A serial cable for connecting the Airlink /Raven modem to Z-max (Ref:702078)
- A cable for connecting the modem to the battery (Ref: 702079)
- A 11.1V 6Ah Li-Ion Battery (Ref:110284)
- All traditional accessories required for on the field work
The Allegro terminal with FastSurvey shall be connected to Z-max either by Bluetooth
wireless link or serial cable to port A.
Serial cable
or
Bluetooth
Port A
Port B
« Y » cable
17/08/2007 6/ 21/