Airlink101 Raven C3210, Как пользоваться инструкцией, Страница: 5 / 21

Once all parameters are displayed on the screen modify the following parameters:
- S53 Destination address -> Set the IP address of the iCGRS station ( Ask to the
iCGRS manager which IP address is given for the iCGRS)
- S53 Destination port -> Set the selected port of the iCGRS station ( Ask to the iCGRS
manager which port number is allocated to you)
- S53 Default Dial Code =T
- MD Startup Mode Default =4
- S211 DTR Mode = 1
- TCPS Connection timeout unit =0
- TCPT Connection timeout (minute) =1
Then click "write" for saving these parameters into the modem.
The modem is ready to use.
3.2.2 Second step – configuration of Z-max
What you need:
- A Field terminal like allegro (optional: a serial cable to connect the Allegro terminal to
Z-max) with FastSurvey
- A Z-max rover
- A Battery module or any other source power compatible with Z-max
17/08/2007 5/ 21/