
AirLink LX60 Series Hardware User Guide
Rev. 2 June 2021
32
41111782
Ethernet LEDs
The connector has two LEDs that indicate speed and activity. When looking into the
connector:
•
Activity—The right LED indicates the link status:
·
Solid—Link
·
Blinking Amber—Activity
·
Off—No link
•
Connection Speed—The left LED indicates the Ethernet connection speed:
·
Solid Green—1000 Mbps (Gigabit)
·
Off—10/100 Mbps
Network
Solid Green
Connected to an LTE network (using SIM card or R2C eSIM)
Solid Amber
Connected to a 3G or 2G network
Flashing Green
Connecting to the network
Flashing Red
No network available, R2C eSIM not activated
Flashing Amber
R2C eSIM activation state unknown
a
Flashing Red /
Amber
Network Operator Switching is enabled, but the router is unable to locate the
required firmware. For more information, refer to the ALEOS Software
Configuration User Guide (Admin chapter).
Wi-Fi
b
Off
Wi-Fi is disabled. (Configurable in ACEmanager and ALMS)
Solid Green
Wi-Fi is enabled.
Solid Amber
Wi-Fi is enabled, and the router is connected to an Access Point.
(i.e. Wi-Fi is being used as the WAN connection)
Flashing
(Green or Amber)
Wi-Fi traffic is being sent or received.
GNSS
b
Solid Green
The router has a GNSS fix.
Flashing Green
No GNSS fix
Off
GNSS is disabled. (Configurable in ACEmanager and ALMS)
ALL
Green LED chase
Radio module reconfiguration/firmware update or Network Operator Switching is
in progress.
Amber LED chase
ALEOS software update is in progress.
Solid Amber
ALEOS software update complete
Red LED chase
Recovery mode
a. May result from ALMS not reporting the R2C eSIM activation state (the LX60, the eSIM, and ALMS have not synchronized
after device registration or a device reset), or status reports from ALMS have been disabled. Network or server issues may
also result in an unknown activation state.
b. LX60 Wi-Fi + GNSS only
Table 2-10: LED Behavior
LED
Color / Pattern
Description