Ensure the Water Tank is firmly seated on the
Base so there is no visible gap between Water
Tank and Base.
Use the Finger Lift to open the Water Tank Lid.
1
2
Filling The Water Tank
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: Never turn Water Tank upside down when full.
Fill the Water Tank using clean, cool, tap water.
Note: Do not fill past the fill line.
WARNING: DO NOT use extremely cold water,
since it may temporarily reduce the mist output.
WARNING: NEVER fill with hot/warm water or
use additives as this could damage the unit and
void the warranty.
WARNING: If you have hard tap water use our
Humidifier Demineralization (hard water)
Filters (available at www.Air-Innovations.com) or
use ONLY filtered, distilled, cold boiled or bottled
water.
4
3
Close the Water Tank Lid. WARNING: NEVER
block air holes as this could effect the performance
of the unit and void the warranty.
5
Extension Nozzle – To convert this unit from a Tabletop unit to Floor unit simply remove the Dual
Directional Mist Nozzle from the top of the Water Tank. Place the unit on your desired floor area and
insert the Extension Nozzle into the Top of the Water Tank. Then place the Dual Directional Nozzle on
the top of the 16” Extension Nozzle. WARNING: Be sure the unit is unplugged and turned OFF
when changing the Nozzles.
4
