PAGE: 1 / 4
Unscrew the lock nuts from the mounting
plate.
Installation Steps :
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
THIS FAN MUST BE INSTALLED WITH A WALL CONTROL/SWITCH.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 24.2 lb (11 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
Fig.1
Turn OFF the electric power at the
main fuse or circuit breaker box.
Fig.2
Outlet Box
Mounting Plate
Mounting Screw
Lock Nut
Mounting Plate
Hook
Fig.3
Fig.4
Motor
Mounting Bar
After making the wire connections, the wires should be spread apart with
the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side of
the outlet box.
After the splices have been made, they should be turned upward and
pushed carefully up into the recessed area of the Mounting Plate.
Make wire connections:
1). The white motor wire to the white wire from outlet box with a wire nut.
2). The black and blue motor wires to the black wire from outlet box with a
wire nut.
3). The ground wire from ceiling outlet box to the ground wire from fan fixture
set with a wire nut.
Tighten the mounting plate to the outlet box with 2 mounting screws. (To
reduce the risk of fire electric shock, or personal injury, mount to the outlet
box marked "Acceptable for fan support" and use mounting screws provided
with the outlet box.)
NOTE: Pull the electrical wires from the outlet box through the center hole
of the mounting plate for motor wiring installation.
Raise Motor and insert the hook of mounting plate into a closed hole on the
mounting bar. This will allow for hands-free wiring.
Instructions for supply connections:
The grounded conductor of the fan
to be connected to the grounded conductor of the power supply. The
ungrounded conductor of the fan to be connected to the ungrounded
conductor of the power supply. The equipment grounding conductor of the
fan to be connected to the equipment grounding of the power supply.
090218
