Tighten the hanger bracket to the
outlet box with 2 mounting screws.
(To reduce the risk of fire electric
shock, or personal injury, mount to
the outlet box marked acceptable for
fan support and use mounting screws
provided with the outlet box.)
061128
TM
Turn off the electric power
PAGE: 1 / 3
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK. BE SURE TO SHUT OFF
POWR WHILE INSTALLING OR SERVING THIS FIXTURE.
N O T E :
1. To ensure the success of the installation, be sure to read these instructions and
review the diagrams thoroughly before beginning.
2. All electrical connections must be in accordance with local codes, ordinances, and
National Electric Code. If you are not unfamiliar with methods of installing with
electrical wiring, secure the services of a qualified licensed electrician.
3. Total fan with light kit weigh ( FN52180--8.36 KGS/18.58 LBS) . When using an existing
outlet box, be sure the box is securely attached to the building structure and can support
the full weight of the fan. Failure to do so can result in serious injury or death.
4. Before starting the installation, disconnect the power by turning off the circuit breaker
or by removing the appropriate fuse at the fuse box. Turning the power off by using
the light switch is not sufficient to prevent electrical shock.
Installation Steps :
Fig.1.
Fig.2.
Model No.: #
FN 52180
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
For Downrod Mount:
Insert the motor wires through the
canopy and downrod.
Fig.3.
For Ceiling Mount:
Attach the canopy to the housing with
ceiling mount screws.
For Downrod Mount
Insert the hanger pin through the
holes in the collar and downrod.
Insert the lock pin through the hole
near the end of the hanger pin until
it snaps into its locked position.
Tighten downrod screws on top of
the fan motor finally.
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
into the chip of hanger bracket exactly.
Fig.3-1.
Fig.4.
Fig.5.
