Aircotec XC-trainer Series, Руководство пользователя

Страница: 27 / 41

Manual V1.00_2009_V5
10. Setting altitude manually
10.1 Alti-set
Provided the launch altitude is known it may be calibrated before
launch in
MENU / ALTI SET
QNH display:
For the QNH-display (in hPa) to be correct, the altitude must be
calibrated before launch. QNH is only displayed up until app.
2000m, as QNH per definition looses significance above this
altitude. Due to ageing pressure sensors it is possible that different
instruments show varying altitudes – the accuracy of the sensor is
however not influenced by this.
11. Landings
11.1 LANDING search 1 – 3
3 landings may be entered before the launch
Select LANDING 1 – 3 to see the Menu.
In the top 1/3 of the display the new coordinates will be displayed.
As long as the GPS signal remains insufficient the text BAD
appears in the upper left screen corner. Below this the currently
stored landing or waypoint is shown.
11.2 Storing LANDINGS 1 – 3
Once the instrument has acquired satellite data to calculate a
position the current position coordinates will be displayed. The large
arrow points towards the latest stored position, and shows the
distance to it. There is also a SAVE option, where the new position
may be stored.
Page 27