G e t t i n g s t a r t e d
Lock the keys (Keyguard)
You can lock and unlock the keys of the pager in the idle screen by pressing
the middle selection key
and after that the power key
.
Note:
If the keys are locked, you cannot switch off the pager by
pressing and holding the power key
. You must first unlock the
pager.
You can set the automatic keyguard on or off via
When you have set the keygard on, you
also need to define the delay for the automatic activation of the keyguard. If
the automatic keyguard is activated with
, the pager switches to the idle
screen when locking the keys.
The on/off setting of the automatic keyguard may also be available in the
menu. See Go to menu on page 28.
When the automatic keyguard is active, the keyguard indicator
is shown
in the upper status bar, no keypad tones are given and you cannot press any
key. Warning tones and alarm tones are normally given when the keys are
locked.
Note:
When a callout alert message is received, the keyguard is
deactivated automatically, if it is active. After the callout mode has
ended and you have closed the callout message, the keyguard is
activated again.
See also Device settings on page 44.
P8GR_en_print.book Page 17 Thursday, November 12, 2020 6:57 PM