G e n e r a l i n f o r m a t i o n
The limited network services in the network mode are only available in the
coverage area of the network cell where the pager was last registered. The
pager cannot register to other network cells while transmission barring is
active, and therefore the area of operation may be limited.
To activate or deactivate transmission barring, select
. Transmission barring
should be active before you enter the area where you want transmission to be
barred.
or
is displayed in the idle mode when transmission barring is
active. Depending on predefined pager settings, the pager may send a
notification message to the network about the activation.
is displayed if the
message does not need to be sent or message sending failed, and
is
displayed if the message has been sent.
Network selection
In addition to your predefined home network, you may be able to select other
networks in which your pager can operate (network service), for example, if
you are not in the coverage area of your home network. The network can be
changed automatically or manually.
Select
Some services are network dependent, so the availability of services may
change when the network is changed. In addition, the availability of groups
may change when the network is changed.
Using your pager in wet and damp conditions
•
You can use this pager in the rain, but do not submerge it in water
•
If the pager or its connectors have been exposed to salt water, you must
carefully wipe them dry
•
Before opening the back cover, dry the pager to prevent water from
reaching the interior of the pager. The battery is not water resistant
•
Never charge the pager when its connectors are wet or damp
•
Never use a damp pager with enhancements that have an electrical
function (such as a home station)
P8GR_en_print.book Page 11 Thursday, November 12, 2020 6:57 PM
